HUIDU HD-S107 Specification
Here is the HUIDU HD-S107 Specification to help you know more about HD-S107 Brightness Sensor overview, tech parameters, features list, Dimension chart, Probe, Connection Cable, Installation Diagram, etc.
- V3.0 20210703
System Overview
HUIDU HD-S107 is a brightness sensor, which is connected to the LED display control system, so that the brightness of the LED display changes with the brightness of the surrounding environment.
Technical Parameters：
| Working temperature | -25~85℃ |
| Brightness range | 1%~100% |
| Sensitivity-high\medium\low | Get data once in 5s\10s\15s |
| Standard wiring length | 1500mm |
Light Sensor Probe：
Connection Cable：
Dimensions
Installation Diagram：
Installation Notes：
- Remove the washer, nut, and connecting wire from S107；
- Before installing the waterproof rubber gasket, put the light sensor probe into the fixed installation hole opened in the box, and screw the rubber ring and nut in turn；
- Install the connecting line: connect the one end of the wiring with aviation head XS10JK-4P/Y female connector and the aviation connector XS10JK4P/Y- male connector on S107 (note: the interface has a foolproof bayonet design, please align it and insert it)；
- Connect the other end of the cable to the sensor of the playback box or control card to connect it correctly.
Statement
This HUIDU HD-S107 Specification is just for reference only, if you have any problems during using this brightness sensor or have any questions about this datasheet, please contact the HUIDU tech department.