Close this search box.




P3 Outdoor LED display module


High Brightness Outdoor HD Vsiaul Solutions

The P3 outdoor LED module is a display panel consisting of a PCB circuit board, hundreds of bright SMD RGB LEDs, some electronic components, and soft waterproof rubber. With up to 111,111 pixels/㎡ LED matrix, over 160° large viewing angle, and over 5,500 nits brightness, the P3 LED panel has a better advantage for providing high-definition high contrast dynamic images as well as video media, especially in outdoor areas. 

P3 Outdoor LED Module, also named outdoor P3mm LED matrix, is a square panel with a measurement of 192mm*192mm, it has a 3mm distance between the center of two adjacent pixels and 4,096 ultra-bright RGB LED arranged on the front at a 64×64 grid matrix. At the back, IDC connectors and 16-bit latches are build-in the PCB board to transform data and enable you to operate the module at a constant current 1: 16 scan. In addition, the P3 is designed with full-color technology that allows you to change any color you want to offer a variety of colorful visual effects.

The outdoor P3 LED display panel is the perfect fit for any application that requires a large, high-resolution, more close viewing, wide-angle view matrix. Because of the same dimensions, this P3mm LED panel is very much like our 6mm 32×32 RGB LED display panel, but the LEDs on this panel are a little closer together (3mm pitch), half the distance of the 6mm matrix, so you don’t have to go as far to have a good look at it. If you need a module that can be viewed from a further distance, check out our other modules such as p4mm, P5mm, P8mm, P10mm, etc.

  • Resolution: 4,096 dots with 64×64 array pixels.
  • 3mm pixel pitch for better visual performance with good Clarity
  • Dimensions: 192mm x 192mm / 7.6” x 7.6”
  • Best for outdoor, 160-degree visibility
  • 5V regulated power input
  • 1R1G1B full-color LED screen panel
  • Constant current 1/16 scan
  • Ultra-high brightness with over 5,500Nit for the best viewing experience even in strong light.
  • Highly stable driver ICs for better color uniformity and vibrant images
  • Designed with the latest SMD 1R1G1B encapsulation, offering excellent full color present.
  • High contrast ratio of 5000:1 to deliver vibrant colors.
  • High refresh rate with over 1920hz to 3840Hz to allow flicker-free
  • Compatible with M3 mounting screws
  • IP65 Protection level, dustproof, waterproof and anti-fog
64×64 dot P3 Outdoor LED display module

Better Visual Effect

The P3 outdoor LED module features a high refresh rate, high viewing angleand industry-leading LED technology,  enabling it to offer excellent quality output and make it ideal for making high-definition LED video walls.

better display effect of common cathodel led screen

3 IN 1



Contrast Ratio


Refresh Rate



HD Visual Performance

The pixel pitch for the P3 outdoor LED module is only 3mm. Lower pixel pitch means higher LED density, higher resolution, and sharper output.

P3 192×192mm Outdoor LED display module

SMD Techology

Employing the innovative SMD 3in1 encapsulation, each pixel is a marvel of engineering, harmoniously blending red, blue, and green LED chips to create an uninterrupted, dynamic visual canvas.

Outdoor P3 SMD1921 LED display panel

High Brightness

High brightness of over 5,500cd/㎡ enables the P3 LED screen can be seen even in bright outdoor environments, and have the ability to meet a wide range of outdoor requirements.

Outdoor P3 LED display module

IP65 Waterproof

Made of high-protection PCB board, it provides IP65 usage level to ensure long-term outdoor operation.

Outdoor P3 LED display panel


LED display module power cables

Power Cable

Standard 4Pin Power Cables are included to connect the module and power supply.

LED display module flat cables

Data Flat Cable

Industry Standardized 16Pin LED Display flat data cable (signal cable) will be offered for free to save cost.

led display module Waterproof Rubber

Waterproof Rubber

A waterproof rubber ring will be included to maximize and optimize the protection level


Product Model P3mm-Outdoor
Pixel Pitch 3mm
Panel Dimension 192(W)x192mm(H)
Pixel Resolution 64×64 dot
Pixel Configuration 1R1G1B
LED specification SMD 3in1
Scan Rate Constant current 1/16 scan
Hor. viewing angle120°
Vert. viewing angle120°
Best View Distance3m – 30m
Grey Level14 bits
Brightness≥5500 cd/㎡
Brightness Adjustment100-grade auto/manual-adjustment
Brightness Uniformity>99%
Input Voltage (AC) DC5V
Avg Power Consumption 250 W/m²
Max Power Consumption 580 W/m²
Operation Power Voltage 100-240V / 50-60Hz
Control System DVI card + Full color control card
Control Mode Synchronous & asynchronous available
Support Input VGA, Video, AVI, MOV, MPG, DAT, VOB etc.
Communication Options Wire Ethernet, Fiber Ethernet,RF wireless, GPRS
Frame Frequency >60 Hz
Refresh Frequency >600 Hz(adjustable)
Color Temperature 3500-9500 adjustable
Control Distance Ethernet cable 100m, optical fiber 5km
Lifetime>=100000 hours
Blind Spot Rate<0.00001
Working Temp(-20)-(+60) Celsius degree
Working Humidity10%-90%
Waterproof Rating (Front/Rear)IP65/IP54
Package TypeCarton/Wooden case/Flight case
Warranty2 years

Common Questions

In short, “P” stands for pixel and the number “3” means that the distance between two adjacent LED pixels is 3 (Unit: mm). So, P3 is the 3mm pitch of the led matrix.

The size is 192*192mm.

The resolution is 64 dots in width and 64 dots in height.

Contact Us

Our sale team will give full support and price you needed.