Close this search box.




outdoor P6mm led display module


High Brightness For Outdoor Large Viewing Visual

The P6 outdoor LED module is a LED screen panel designed for various outdoor LED displays, LED video walls, and LED billboards for offering running images, text, or videos and is made with 1,024 luminous LEDs, a plastic PCB circuit board, and some necessary electronic components like capacitors, IC drivers, etc. As a LED panel designed for outdoor purposes, the P6 LED module provides ultra-high brightness and contrast to meet outdoor installation standards to enable it has the ability to provide the ultimate visual experience.

P6 outdoor LED module has a pixel pitch of 6mm and there are 32×32 RGB LEDs arranged in a LED array with a size of 192×192mm. In terms of resolution, the P6mm LED module has an ultra-high density of up to 1,024 dots and is mainly used in the outdoor advertising industry such as media displays, traffic signs, stadium displays, digital signage, exhibition displays, and so on. With a 6mm pixel pitch, more than 1920Hz refresh rate, and industry-leading SMD LED, the outdoor P6 LED module achieves better performance in terms of visual experience and offers fine color consistency and a true-to-life image while meeting all requirements for large-scale LED display.

Compared with the P8mm LED panel or P10mm LED module, The P6 module has a higher contrast rate and closer viewing distance.  As for viewing distance, the optimum viewing distance for the P6 module is approximately 7m to 25m. So, it will be very clear and viewable for viewers at a distance of 7m, but when viewed from 25m away, the display will be less clear, but acceptable.

  • 1024 Dot bright LED for better visual effect with full-color output.
  • 6mm pixel pitch for longer viewing distance with good Clarity.
  • Dimensions: 192mm x 192mm / 7.6” x 7.6”.
  • Best for outdoor, 160-degree visibility.
  • 5V regulated power input.
  • 1R1G1B full-color LED screen panel.
  • 1/4 scanning drive mode.
  • Ultra-high brightness with over 5,500Nit for the best viewing experience even in strong light.
  • Highly stable driver ICs for better color uniformity and vibrant images.
  • Designed with the latest SMD 1R1G1B encapsulation, offering excellent full color present.
  • Exhibiting a grey level of 14 bits and a contrast ratio of 5000:1, the LED module delivers vibrant colors, crystal-clear images, and strong light-to-dark contrasts.
  • High refresh rate with over 1920hz to 3840Hz to allow flicker-free.
  • Compatible with M3 mounting screws.
  • IP65 Protection level, dustproof, waterproof and anti-fog.
outdoor P6 192×192mm LED display board

Better Visual Effect

Designed for reliability, the P6 outdoor LED display module uses stable LED driver ICs such as MBI5124, ICND2038S, ICND2037, ICN2055, ICND2065, and SM16380 to provide deep contrast and sharper images.

better display effect of common cathodel led screen

3 IN 1



Contrast Ratio


Refresh Rate



SMD Techology

P6mm outdoor LED modules use industry-leading LED chips such as Nationstar, Kinglight to ensure high stability and high-performance output.

P6 SMD3535 outdoor led display board

Uniform Color

With higher color contrast, and refresh rate, the P6 outdoor LED matrix achieves a high standard of outdoor installation and can provide more uniform, vibrant colors, and a more natural visual experience.

full color P6 32×32 dot outdoor led display module

High Brightness

Ultra high brightness with over 5,000Nit for best viewing experience even in strong light.

P6 outdoor led display module

IP65 Waterproof

High protection level with the excellent PCB board design, mask, and waterproof rubber, to meet strict outdoor needs.

P6 outdoor led display panel


LED display module power cables

Power Cable

Standard 4Pin Power Cables are included to connect the module and power supply.

LED display module flat cables

Data Flat Cable

Industry Standardized 16Pin LED Display flat data cable (signal cable) will be offered for free to save cost.

led display module Waterproof Rubber

Waterproof Rubber

A waterproof rubber ring will be included to maximize and optimize the protection level


Product Model P6mm-Outdoor
Pixel Pitch 8mm
Panel Dimension 192(W)x192mm(H)
Pixel Resolution 32×32 dot
Pixel Configuration 1R1G1B
LED specification SMD 3in1
Scan Rate Constant current 1/4 or 1/8 scan
Hor. viewing angle120°
Vert. viewing angle120°
Best View Distance6m – 60m
Grey Level14 bits
Brightness≥5500 cd/㎡
Brightness Adjustment100 grade auto/manual-adjustment
Brightness Uniformity>99%
Input Voltage (AC) DC5V
Avg Power Consumption 250 W/m²
Max Power Consumption 580 W/m²
Operation Power Voltage 100-240V / 50-60Hz
Control System DVI card + Full color control card
Control Mode Synchronous & asynchronous available
Support Input VGA, Video, AVI, MOV, MPG, DAT, VOB etc.
Communication Options Wire Ethernet, Fiber Ethernet,RF wireless, GPRS
Frame Frequency >60 Hz
Refresh Frequency >600 Hz(adjustable)
Color Temperature 3500-9500 adjustable
Control Distance Ethernet cable 100m, optical fiber 5km
Lifetime>=100000 hours
Blind Spot Rate<0.00001
Working Temp(-20)-(+60) Celsius degree
Working Humidity10%-90%
Waterproof Rating (Front/Rear)IP65/IP54
Package TypeCarton/Wooden case/Flight case
Warranty2 years

Common Questions

In short, “P” stands for pixel and the number “6” means that the distance between two adjacent LED pixels is 6 (Unit: mm). So, P6 is the 6mm pitch of the led matrix.

The size is 192*192mm.

The resolution is designed to be 32×32 dot pixels.

Contact Us

Our sale team will give full support and price you needed.